❈ How To: Antique Patina on BrassAge bright brass hardware in hours, not years.
|Note: This technique works only on solid-brass hardware. Thin plating may be entirely removed by this process.|
|In searching for the hardware for the Heirloom Pine Hutch from WOOD issue 147, they came across hinges and door catches in just the style they wanted. The only problem: The hinges are black for the rustic look they want, but the catches are available only in bright brass. If you ever find yourself in a similar pickle, the solution is only five easy steps away. You already may have everything you need to put an antique patina on brass hardware. Here's how ...|
Soak the hardware overnight in lacquer thinner to remove any protective coating, as shown in Image 1. Bend hooks onto both ends of a 2-1/2"-long piece of coat-hanger wire, and use it to fish the hardware out of the lacquer thinner. Blot the hardware dry with a clean rag.
Dissolve 2 tablespoons of salt in 1 cup of water. Pour 1/2" of household ammonia into a 1-lb coffee can. Punch a hole in the can's lid to accept one end of the double-ended hook. Using the hook, dip the hardware in the saltwater solution, as shown in Image 2.
Hang the hardware on the can lid, and snap the lid onto the can, suspending the hardware inside the can as shown in Image 3. Don't let the hardware touch the ammonia.
Heat the can with a hair dryer for 2 minutes, as shown in Image 4. Dip the hardware in salt water again, and repeat the ammonia fuming. Dip and fume until you obtain the desired patina. We got good results with six, 2-minute treatments. Note: Because the salt water flows to the bottom edge of the hanging part, the patina concentrates there. Even the patina by inverting the hardware for each fuming.
Remove the hardware from the coffee can, rinse it thoroughly in running water, and let it dry. Wipe off any surface powder with a soft cloth. Spray on two coats of satin lacquer.
|WOOD Issue 147, Mar. 2003
We are a participant in the WOOD store affiliate program, an advertising program designed to provide us a means to earn advertising fees by advertising for WOOD Magazine.